เครื่องทดสอบการพิมพ์ AMSTERDAM 5 เครื่องทดสอบการพิมพ์ AMSTERDAM 5
DESCRIPTION
Automated multi-purpose printability tester with five printing shafts.
New range of Printability testers with integrated, camera based, analysis systems. The range consits of devices with one to six printing shafts for maximum flexibility of test methods. The long range of test methods can be extended with user defined methods. With that it is capable to perform all tests of a Global Standard Tester P plus the tests of a Global Standard Tester 2 and more, inclusive combinations of constant and increasing speed in one test method.
Additionally it is prepared to do on-line analysis of pick ISO 3783, mottling, Heliotest, print penetration, IGT roughness and hydro expansivity with a camera based analysis system.
•1 to 6 printing shafts, each can be equipped with a drive for printing in register if needed
•Very small interval times, up from 0,02 s
•Large number of test methods
•Very easy in operation
•In-line analysis of several test methods
•Export of scanned images and results
FEATURES
Five printing stations, constant speed, accellerating speed, camera for image recording, optional analysis of pick ISO 3783, Heliotest, mottling, print penetration, IGT roughness and hydro-expansivity, doctoring station for gravure printing, user programmable, recording of test data and settings, export of data on USB stick.
TECHNICAL DETAILS
| Weight |
150 kg |
| Dimensions |
60 × 63 × 73 cm |
| Analysis options |
Heliotest, Hydro-expansivity, IGT Roughness, Mottling, Pick ISO 3783, Print penetration, Yes
|
| Camera |
Yes
|
| Nr. of doctoring systems |
1
|
| Weight |
150 kg
|
| Dimensions (d x w x h) cm |
60 x 63 x 73
|
| Conformance with standards |
ISO 2834, ISO 2836, ISO 2846, ISO 3783-2006, NEN 1836, NEN 1839
|
| Speed range and modes |
Accelerating end speed: 0.1-4.0 m/s in steps of 0.1 m/s, Constant speed: 0.1-4.0 m/s in steps of 0.1 m/s
|
| Forces |
100-1000 N in steps of 1 N
|
| Substrate requirements |
Flexible substrates
|
| Interval time and number |
1-600 s in steps of 1 s
|
| Nr. of printing shafts |
5
|
| Shaft positioning |
Automatically, Programmable
|
| Lifting system |
Automatically
|
| Print length and width (mm) |
10-550 length (sector dependent) depends on printing form and test method, 5-50 mm wide
|
| Printing discs |
Aluminium, Discs for specific test, Gravure, Heliotest, Rubber, Rubber Blanket
|
| Sector positioning |
Automatically, Programmable
|
| Sector type and options |
180° sector with clamps, 360° sector without clamps with different coverages
|
| Doctoring system |
Standard at print shaft 1
|
| Dispensing system |
If necessary this will be delivered in accessories set
|
| Pre-programmed tests |
custom made tests on request, Density Colour and transparency, Gravure, Heliotest, Hydroexpansivity, IGT Roughness, Pick, Print penetration, Toner adhesion
|
| Interfaces |
USB Portal
|
| Software updates |
Via USB
|
| Data export options |
Recording and export of images, settings and analysis results via USB
|
| Additional items |
408.000.200 IGT Ink Pipette 0.01 ml resolution, 408.000.400 IGT Ink Pipette 0.001 ml resolution, 441.000 Pick Start Viewer PSV, 441.000.040 Delamination/Blistering viewer, 466.000.000 High Speed Inking Unit 4
|
| Accessories |
Different printing discs for several applications, Gravure set, Heliotest set, Hydro-expansivity set, Intaglio inking set, Loose and weakly bound particles set (Fluff), Mottle set Back trap method W57, Mottle set Print Method W58, Picktest set, Westvaco Pick test set |
| Inks or liquids |
Density test ink, Mottle test ink, Penetration liquid, Roughness liquid, Set-off ink, Pick test ink, Pick test oil
|
| Maintenance |
– Yearly., Information can be obtained from your supplier or the local agent., The annual maintenance and calibration of the tester can be carried out by IGT Testing Systems or companies authorized by IGT Testing Systems.
|
| Compatible instruments |
726.000.000 Amsterdam 6
|
| Power Supply Requirements |
115 V 50/60 Hz or 230 V 50/60 Hz
|
| Guarantee |
Standard one year
|
| Space requirements |
0.7 m²
|
| Test method |
Colour matching, Colour/densitiy/ink transfer (W46), Felt and Wire side (W60), Flexo print (W76), Fluff (W33), General ink testing (e.g. density, transparency, CxF), Gravure 180° (W67), Gravure 360° (W73), Gravure Set-off 4 times, Halftone Printing (W45), Heliotest (W41), Hydro-expensivity (W89), IGT Roughness (W28), Ink Trapping (wet on wet) 2C / 4C (W46), Intaglio W85), Linting (W44), Linting, pre-wetted, Mottle: Back Trap Curve (W57), Mottle: Back Trap Index (W57), Mottle: Ink Trap Curve (W58), Mottle: Ink Trap Index (W58), Mottle: Print Curve (W58), Mottle: Print Index (W58), Mottle: Water interference Curve (W59), Mottle: Water interference Index (W59), Passes-to-fail (W87), Pick: IGT ISO 3783 (W31), Pick: Offset (Delammination) (W65/W75), Pick: PassesToFail Index & Curve (W86/W87/W88), Pick: Westvaco (W38), Pick: Wet pick / Wet repellence (W32/W66), Print Gloss (W49), Print penetration (W24), Print Smoothness (W77), Print varnish, Rubber blanket ink absorption (W61), Rubber blanket ink transfer (W74), Rubber blanket roughness (W62), Set-off (W48/W78), Strike through (W43), Toner adhesion (constant speed) (W55), Toner adhesion (increasing speed) (W56), Wet-on-wet printing (W46)
|
|
เครื่องทดสอบการพิมพ์ AMSTERDAM 6 