Biomass Moisture Meters BLL
Wood chip moisture meter BLL
เครื่องวัดความชื้นชีวมวล
BLL
Wood Chip Moisture Meter with Insertion Probe
Measuring Range: 10 - 50% MC
Accurately measure the moisture content in Wood Chips with our BLL meter. One meter long insertion probe for easy measurement in deep piles of chips. The BLL is supplied with three (3) separate calibration curves, depending upon the physical makeup of the wood chips to measured. There are defined into the following classes as described in the European Standards as; Wood Chips, Coarse WC and Industry WC.
Wood Chips
A mix of different-sized wood chips
all LESS THAN 70 mm (2-3/4")
Coarse WC
Equal-sized wood chips approx. 70 mm (2-3/4")
Industry WC
A mix of different-sized wood chips
all LARGER THAN 70 mm (2-3/4")
Features
- Directly mounted 1 meter long insertion probe
- Conversion of wood moisture into water content
- Automatic averaging
- Sample temperature measurement
- Automatic temperature compensation
- Temperature can be set to °C or °F as required
- Measurement within seconds without prior treatment of samples
- Hold function, manual saving of results, data log for 10,000 logs within measuring point report
- Supplier's data can be recorded
- Large, well-lit LC display
- BLL-USB is supplied with USB output including software and data transfer cable
- Gauge menus in English, German, French, Italian, Spanish and Russian
- Supplied in custom fitted wood carrying case
Specifications
| Measuring range |
up to 50% water content depending on material |
| Resolution |
0.5% water content (0.5 °C or °F) |
| Accuracy |
± 3% |
| Measurement Technique |
Resistance, |
| Temperature Range for determination water content |
0° - 40° C |
| Temperature Measurement Range |
-10°C to + 80°C |
| Length of insertion probe |
1 meter |
| Menu languages |
English, German, French, Italian, Spanish and Russian |
| Housing |
Plastic with IP40 rating |
| Data logger |
10,000 moisture measurements plus date, batch & temperature |
Data Interface
(BLL-232 only) |
RS-232, 9600/8/N/1
(supplied with transfer cable & USB converter) |
| Display |
Graphic LCD display with backlight (128 x 64 pixel) |
| Temp Compensation |
Automatic in °C or °F using built-in temperature probe |
| Power |
4 x 1.5 Volt AA Alkaline batteries |
| Battery Life |
900 measurements
(with auto-off after 6 minutes of non-use) |
| Shipping Dimensions |
6" x 6" x 48" |
| MC% Method |
Wet Basis (http://tinyurl.com/qayqvqe) |
Complete Kit
The BLL is supplied as a complete kit including the meter with rubber protective shell and integrated insertion probe, handle extension, AA batteries and instruction manual in a fitted wood carrying case. BLL-USB also includes data transfer software and USB cable
Concrete/Mortar Moisture Tester HI-800 