เครื่องทดสอบความแข็งโลหะ Hardness Tester Brinell 900-355 Series (Phase ll)

เครื่องทดสอบความแข็ง Brinell แบรนด์ Phase ll เครื่องทดสอบความแข็งที่แม่นยำ หน้าจอแสดงผลแบบดิจิตอล ออกแบบมาเพื่อการอ่านที่รวดเร็วเหมาะสำหรับการวิเคราะห์ความแข็งของชิ้นงานโลหะ โลหะ ทองแดง สังกะสี ทองเหลือง อลูมิเนียม ได้

สามารถติดต่อสอบถามได้ที่ 02-9744354-6 สายด่วน 088-7777277
ขอใบเสนอราคาได้ที่ Email : salesitokin@gmail.com
Line : @itokin2000.com

Brinell Hardness Tester Features:

Load Cell driven system provides precise control of test force application
Direct digital reading
Engineered to obtain highly sensitive and accurate readings
Perfect for laboratories, workshops, tool rooms, inspection labs, etc.
Measuring Range: 8-650HBW

Brinell Hardness Tester Technical data:

Brinell Loads：3000kgf (29400N), 1500Kgf (14700N), 1000Kgf (9800N), 750Kgf(7355N),500Kgf (4900N), 250Kgf (2452N), 187.5Kgf (1839N), 125Kgf (1226N),100Kgf (980N), 62.5Kgf(612.9N)
Load dwell duration: 2s～99s, can be set and stored
Tungsten Carbide Ball indenter: 10mm, 5mm, 2.5mm
Measuring range: 8-650HBW
Magnification of the Brinell microscope: 20X
Resolution capability of the Brinell microscope: 0.005mm
Max measurable height: 230 mm
Max measurable depth: 140 mm
Dimensions: 530mm×260mm×750mm
Power supply: 220/110 V, 50/60 Hz, 4A Prior to ship, please advise power setting needed.
Weight: 110kg
Standard blocks: 125-350HBW10/3000, 125-350HBW10/1000

Brinell Hardness Tester Specifications:

Innovative closed-loop technology. The Brinell hardness tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations.
The whole weight of the Brinell Hardness tester is 50% less than the traditional dead weights type tester.
Test load selection by keyboard and LCD screen.
Fully automatic test cycles. The Brinell hardness Tester features a fully automatic test cycle, load application, holding, unloading, is performed fully automatically. This greatly improves reproducibility of test results since operator influence is eliminated.
Selectable dwell times by screen. The indenter, load, and other test information are shown clearly on the large LCD screen.
The directions for 0.102F/D2 ratios selecting according to the materials and hardness range can be showing on the screen.
Equipped with a 20X optical microscope to measure the diameter of Brinell indention.
Brinell Hardness Calculator (BHC) make the Brinell hardness value calculation easier and convenient.