ลักษณะเฉพาะ
- อัตราการสุ่มตัวอย่างสูง (2000Hz) เพื่อผลลัพธ์ที่แม่นยำ บันทึกการเปลี่ยนแปลงเล็กน้อยและค่าสูงสุดที่แม่นยำโดยทำตามการเปลี่ยนแปลงของแรงบิดอย่างรวดเร็ว
- การจัดการข้อมูลที่ง่ายดายโดยใช้ซอฟต์แวร์ Force Logger ที่ให้มาผ่านการเชื่อมต่อ USB กับ PC
- ลดความเสี่ยงของค่าที่อ่านผิดด้วยจอแสดงผล EL อินทรีย์ความสว่างสูงที่อ่านง่าย
- จัดการตัวอย่างได้หลากหลายพร้อมตารางและอุปกรณ์เสริมต่างๆ ที่เป็นตัวเลือก
- ซอฟต์แวร์เสริม Force Recorder Light/Standard สำหรับการสร้างกราฟแรงบิดตามเวลาจริงกับเวลาที่ 2,000 ข้อมูล/วินาทีบนพีซี แสดงภาพการเปลี่ยนแปลงเล็กน้อยของแรงบิดเพื่อการวิเคราะห์ผลลัพธ์โดยละเอียด
มาตรฐานสากลที่รองรับ
ISO 17480 (2015) [Packaging - Accessible design - Ease of opening] (corresponding part only)
JIS S0021-2 (2018) [Packaging - Accessible design - Ease of opening] (corresponding part only)
Screw cap torque tester (torque gauge) DTXS series is standard type offering highly repeatable torque measurements with 50N-cm to 10N-m(1000N-cm) capacity. It is ideal for measuring opening/closing torque of various samples such as bottles. It comes with data logging software for easy data management.
Feature
- High sampling rate (2000Hz) for accurate results, capturing small changes and accurate peak values by following rapid changes of torque
- Easy data management using supplied software Force Logger via USB connection to PC
- Reduces risk of misreading values with easy-to-read high luminance organic EL display
- Handles a wide range of samples with various optional tables and attachments
- Optional software Force Recorder Light/Standard available for real-time graphing of torque vs. time at 2000 data/sec on PC, visualizing small changes of torque for detailed analysis of results
Standards
ISO 17480 (2015) [Packaging - Accessible design - Ease of opening] (corresponding part only)
JIS S0021-2 (2018) [Packaging - Accessible design - Ease of opening] (corresponding part only)
The CAP-DTXS is an easy-to-use, high-precision cap torque tester that features a large electroluminescent display that clearly indicates the real-time and peak torque. Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights indicate a value less than low setpoint, green lights between high and low, and red for over the high.
The CAP-DTXS is supplied with ZT Logger data acquisition software. It can download data from the tester memory or captures continuous data at 10 points/second. Zero the tester or capture data while at the computer. All tester programming can be set and saved from the software.
Optional Force Recorder data acquisition software is designed to process up to 2,000 data per second.
All CAP-DTXS cap torque testers include a 3 Point Calibration Certificate traceable to NIST. DTXS cap torque testers include AC adapter/charger and built-in Ni-MH rechargeable batteries, 1″ high standard pegs (optional long pegs and calibration kit available).
Features
- Test cap loosening (CCW) and tightening (CW) torque
- Selectable real time and peak modes
- USB, RS-232, Digimatic and Analog outputs
- Selectable units of lbf-in, kgf-cm, N-m, ozf-in, N-cm
- 1000 data point memory capacity
- Programmable high/low setpoints with color-coded LED indicators and audible signal
- Overload and low battery indicators
- 200% overload capacity
- DTXS accommodates samples from 20 up to 160 mm (0.787" - 6.30")
- Four rubber-coated 1 inch pegs are included with DTXS
- Optional "Small Table" accommodates samples from 7 up to 50 mm (0.275" - 2")
- Optional Peg sizes/material available
- Include 3 Point Calibration Certificate traceable to NIST. ISO 17025 Calibration Certification optionally available
- 2 Year Warranty
Torque Ranges - Capacity (Resolution)
Model
lbf-in
kgf-cm
N-cm
Nm
ozf-in
CAP-DTXS-15
15.00 (0.01 lbf-in)
20.00 (0.01 kgf-cm)
200.0 (0.1 N-cm)
2.000 (0.001 Nm)
240.0 (0.1 ozf-in)
CAP-DTXS-40
40.00 (0.01 lbf-in)
50.00 (0.01 kgf-cm)
500.0 (0.1 N-cm)
5.000 (0.001 Nm)
640.0 (0.1 ozf-in)
CAP-DTXS-85
85.0 (0.1 lbf-in)
100.0 (0.1 kgf-cm)
1000 (1 N-cm)
10.000 (0.01 Nm)
1360 (1 ozf-in)
Optional Small Table
Clamps diameters from 7mm ~ 50mm
DT-ST
DT-ST-01
DT-ST-02
Small table with standard pegs.
Small table with steel pegs.
Small table with long pegs.
Dimensions
Specifications
Accuracy
±0.5%F.S.±1digit
Unit of measurement
lbf-in, kgf-cm, N-m, ozf-in, N-cm
Display
4-digit
Display update
10 times/ sec
Auto Zero Reset
1.0 to 60 seconds (selectable)
Sampling rate
2,000 samples/second (max) thru the USB port
Safe overload rating
Approx. 200%
Operating Environment
Temperature: 0-40 °C Humidity: 20 -80%RH
Output
Outputs USB, RS-232C, Digimatic and ± 2 VDC analog output (D/A),Comparator 3 steps (-NG/OK/+NG), Overload alarm
Overload warning
Approx.110%F.S. (Warning message and alarm )
Sensitivity
Max, High, Medium, Low (selectable)
External connecting switch
SEND (a point of contact holding), Zero reset, Peak, ON/OFF setting
Auto Power Off
5, 10, minutes or OFF (selectable)
Power
Built-In Rechargeable Ni-MH battery pack or via AC-Adapter (100-240V AC)
Battery Life
approx. 8 hours (recharge time approx. 10 hours)
Battery Indicator
Indicates three charge states high, medium and low
Plug Type
USA Blade Type (Select Euro Plug Adapter for use in 230V Countries)
Weight
Approx. 10 Lbs/4.5kg (Including Standard table and Standard pins)
Cap Torque Meter DB Series 