เครื่องวัดความหนาสี Coating Thickness Gauge TM-550 FN

เครื่องวัดความหนาสีรุ่นนี้ เป็นรุ่นที่ใช้งานได้ดี มีความทนทาน และประหยัด สามารถวัดได้ทั้งโลหะ และอโลหะ ย่านการวัดที่ 0-1300 ไมครอน

สามารถบันทึกหน่วยความจำได้ 99 ค่า  สามารถดูค่า Maximium, Minimium, Average ได้ 

เครื่องวัดความหนาสี รุ่นนี้ มาพร้อม Software และ Data Cable

 This compact gauge can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals.

  The internal probe can work on both principles, magnetic induction and the eddy currents. The probe can automatically detect the substrates type (Magnetic or not), and calculate the coating thickness and display it fast.

  There are five data groups, and readings will be automatically stored to memory for general groups (Not for direct group).Each group has individual statistics, alarm limit settings and calibration. User can recall and delete specified readings easily.  User does all operations via standard menu so easily. User can press the CAL button to start calibration freely.

Feature

1. 128*128 dot matrix LCD display, standard menu operations

2. Two measure mode: single and continuous

3. Two group mode: direct (DIR) and general(GEN), readings will be lost when power off in direct mode, and not be lost in general mode. 80 readings can be stored for each group

4. Zero point calibration and multi-point calibration(up to 4 points) for each group

5. User can recall, delete specified readings, or delete group readings

6. Statistics display: mean, minimum, maximum and standard deviation

7. Three probe mode: auto, magnetic and eddy current

8. User can set high or low limit alarm for each group

9. Power off automatically

10. USB interface to data transmission

11. Low battery and error indication

Specification

Measuring principle: Magnetic induction (F-probe) and eddy current (N-probe)

Measuring range: 0 to 1300um (0 to 51.2mils);

Accuracy:

± (3% of readings+2um)

± (3% of readings+0.078mils)

Resolution:

0um~999um (1um), 1000um~1300um (0.01mm)

0mils~39.39mils (0.01mils), 39.4mils~51.2mils (0.1mils)

Calibration: One to four point calibration, zero calibration

Data Group: One direct group (readings not be stored to memory), four general group (readings can be stored) 

group have individual statistics, alarm settings and calibration

Statistics: No. of readings, mean, minimum, maximum and standard deviation

Units: um, mm and mils

Alarm: User can set the high/low alarm, and alarm icon displayed on LCD when over the limit

Minimum curvature radius: convex 1.5mm(59mils) and concave 25mm(984mils)

Minimum measuring size: Diameter 6mm(236mils)

Minimum thickness of substrate: F-probe: 0.5mm(0.02"), N-probe: 0.3mm(0.012")

Computer interface: Download data via USB interface

Power supply: Two 1.5v AAA battery

Operation temperature: 0℃ to 40℃(32℉ to 104℉)

Storage temperature: -20℃ to 70℃(-4℉ to 158℉)

Size: 110mm*53mm*24mm (4.33"*2.09"*0.94")

18. Weight: 92g (3.24oz)

STANDARD CONFIGURATION
- Gauge 1
- Aluminium substrate 1
- Standard foil 5
- 1.5V AAA battery 2
- Technical manual 1
- USB cable 1
- Case