Cutting Fine Deburring
เครื่องตัดเบาและลบความคม E3000 Controller (Nakanishi)
ช่วงความเร็วมอเตอร์กว้างตั้งแต่ 1,000 ถึง 80,000 นาที-1 และจอแสดงผลดิจิตอล 2 หลักทำให้สามารถตั้งค่าความเร็วโดยเพิ่มทีละ 1,000 นาที-1 ไม่จำเป็นต้องตั้งค่าความเร็วมอเตอร์สูงสุดเนื่องจากจะตรวจจับมอเตอร์ที่เชื่อมต่ออยู่โดยอัตโนมัติ
Specification
Rated input |
AC 100–240 V, 50/60 Hz, 1 phase, 1.8 A |
Rated output |
AC 33 V, 0–1 kHz, 3 phase, 2.4 A |
Max. output |
350 W |
Rotation speed range |
1,000–80,000 min-1 |
Net weight |
2.8 kg |
Dimensions |
W88 mm × D138 mm × H238 mm |
Monitor panel
Visualization of processing load
Use of the load meter enables setting of the optimal processing conditions.
Visualization of processing load
Range of motor speed
The motor speed range is wide from 1,000 to 80,000 min-1, and the 2-digit digital display enables the speed to be set in 1,000 min-1 increments. There is no need to set the maximum motor speed as it automatically detects the connected motor.
MOTOR SPINDLES
Electric System
E3000
series
Great Variety
The largest range of products
The largest range of products
・Outer diameter: φ20, φ22, φ25, φ26, φ26.8, φ30, φ33, φ40, φ48, φ50
・Max. power: 350 W
・Max. motor speed: 80,000 min-1
・28 types of motor spindles (straight, angle head, automatic tool change, air bearing, antistatic, etc.)
・Spindle accuracy: within 1 μm
・Can be mounted on CNC lathes, robots, and special purpose machines
Features
Available in separate type (combination type) and one-piece type (all-in-one type)
|
|
・Good point of separate type |
・Good point of one-piece type |
Spindle and motor can be freely combined and selected depending on the processing application.
Spindles and motors with various characteristics enable a variety of solutions. |
The overall length of the motor spindle is shorter than that of the separate type, making it easier to mount on small space-saving CNC lathes and special purpose machines. |
Supports φ6.35 tools
Tools with shank diameters up to φ6.35 can be attached.
Please note that the attachable shank diameter size varies by model.
Supports various mounting methods
Three types of products are available to meet your mounting needs.
・Straight type
Need to make a holder to mount on a machine
・Straight type + Grip Ring
Attach the GR-30 Grip Ring (sold separately) to the spindle
Eliminates the need to make your own holder
How to mount on a machine
・Flange type
Spindle and holder integrated type
Easy to mount on a machine
Motors with various characteristics
Our lineup of motors with various characteristics enables selecting the motor depending on processing application.
|
|
|
Torque & power curve |
Torque & power curve |
Torque & power curve |
80,000 min-1 motor spindle |
60,000 min-1 motor spindle |
30,000 min-1 motor spindle |