Cutting Fine Deburring เครื่องตัดเบาและลบความคม E4000 Controller (Nakanishi)
·เส้นผ่านศูนย์กลางภายนอก/O.D.:φ40
・สูงสุด กำลังไฟ : 1,200 วัตต์
・สูงสุด แรงบิด: 1.0 นิวตันเมตร
・สูงสุด ความเร็วมอเตอร์: 40,000 นาที-1
・ความแม่นยำของสปินเดิล: ภายใน 1 μm
・สามารถติดตั้งบนเครื่องกลึง CNC หุ่นยนต์ และเครื่องจักรเฉพาะทางได้
Monitor panel
Visualization of processing load
Use of the load meter enables setting of the optimal processing conditions.
Specification
| Rated input |
AC 200–240 V, 50/60 Hz, 1 phase, 3.2 A |
| Rated output |
AC 48 V, 0–0.66 kHz, 3 phase, 7.8 A |
| Max. output |
1,200 W (machine shaft output) |
| Rotation speed range |
1,000–40,000 min-1 |
| Net weight |
6.7 kg |
| Dimensions |
W250 mm × D290 mm × H100 mm |
Range of motor speed
The motor speed range is wide from 1,000 to 40,000 min-1, and the 3-digit digital display enables the speed to be set in 100 min-1 increments. There is no need to set the maximum motor speed as it automatically detects the connected motor.
.jpg)
External control function
The controller can be externally controlled by external devices such as sequencers.
In addition, the operating status can be monitored by an external device via a monitor output.
*Please refer to the operation manual for details.
*To activate the emergency stop function on the E4000 controller, the separately sold Safety Relay Box is required.
MOTOR SPINDLES
Electric System
E4000
series
Little Giant
This little spindle brings you a giant profit
Achieve overwhelmingly high torque
・Outer diameter: φ40
・Max. power: 1,200 W
・Max. torque: 1.0 N·m
・Max. motor speed: 40,000 min-1
・Spindle accuracy: within 1 μm
・Can be mounted on CNC lathes, robots, and special purpose machines
 |
 |
| ・Good point of separate type |
・Good point of one-piece type |
Spindle and motor can be freely combined and selected depending on the processing application.
|
The overall length of the motor spindle is shorter than that of the separate type, making it easier to mount on small, space-saving CNC lathes and special purpose machines. |
Supports φ10 tools
Tools with a maximum shank diameter of φ10 can be attached.
This is the largest that can be attached to the Nakanishi spindles.
Mounting support tools available
The GR-40 Grip Ring enables easy mounting on machines.
High-speed type and high-torque type are available
Two types are available for various processing applications.
・High-speed type with a maximum motor speed of 40,000 min-1
・High-torque type with a maximum motor speed of 20,000 min-1
 |
|
| Torque & power curve |
Torque & power curve |
| 40,000 min-1 motor spindle |
20,000 min-1 motor spindle |
Cutting Fine Deburring เครื่องตัดเบาและลบความคม E3000 Controller (Nakanishi) 