Force Gauge PCE-DFG N 100K
สอบถามสินค้าได้ที่ 02-9744354-6 สายด่วน 088-7777277
Line : @itokin2000.com
Email : salesitokin@gmail.com
Force Gauge (PCE)
Force Gauge หรือที่หลายคนเรียกว่า Push-Pull Gague เป็นเครื่องวัดค่าแรงดึง แรงกด ของชิ้นงาน ใช้ได้หลายประเภท เป็นที่ใช้งานกันแพร่หลาย ในปัจจุบัน จากประเทศอังกฤษ (United Kingdom) U.K.
ดาวน์โหลดสเปก
Force gauge PCE-DFG N 100K
with external S load cell, USB interface and PC software
The force measuring device measures both tensile forces and compressive forces and this with a very high resolution. The tensile force or compressive force is often required in test laboratories, for example. The force gauge is supplied with an external measuring cell. The measuring cell is connected to the force measuring device by an approx. 6 m long sensor cable. The force measuring device or the force measuring cell has an M20 thread mount to initiate the tensile or compressive forces.
The force measuring device can work with a sampling rate of up to 1600 Hz. The scanned measured values are displayed as instantaneous values as well as in a graphical measurement curve directly in the force measuring device. The measurements can be stored in the internal memory or transferred as a live measurement via USB interface with the software included in the scope of delivery with a maximum of 800 Hz. The force measuring device has a graphic LCD that displays the measured values numerically and graphically. Furthermore, the force measuring device is protected according to IP54 and can therefore also be used in harsh industrial environments.
The force measuring device offers the possibility of storing two limit values that are continuously compared with the current value. If these limit values are exceeded or not reached, a signal appears in the display of the force measuring device, as well as a reaction via external interfaces, e.g. this can be used to control a testing machine.
- USB interface
- Graphic display
- Fast response time
- PC software incl.
- Memory for 100 measurements
- Including ISO calibration certificate
Specification PCE-DFG N100K
| Measuring range |
0 ... 100 kN / 10,000 kg / 10 t |
| Resolution |
10 N |
| Accuracy |
±1.0% of the measuring range |
| Measurement units |
kN, t, klb, MPa |
| Display |
2.8" TFT graphic display |
| Alarm modes |
Inside, Outside, Crack/Overload, Shutdown |
| Sampling rate |
6 ... 1600 Hz |
| Memory |
100 measurements |
| Power supply |
NiMh battery, 6 V / 1600 mAh |
| Battery life |
approx. 10 hours |
| Power supply / charging adapter |
12 V / 1 A |
| Outputs |
interface: USB
switching output: 12 V / 50 mA |
| Protection class handset |
IP 54 |
| Protection class load cell |
IP 67 |
| Operating and storage conditions |
-10 ... 50 °C
5 ... 95 % r.h. not condensing |
| Dimensions of load cell |
L 112.78 mm / H 177.8 mm / W 42.93 mm / M30 x 2 thread
(see technical drawing) |
| Cable length load cell |
ca. 6 m |
| Dimensions of handset |
200 x 97 x 42 mm |
| Weight of handset |
540 g |
| Weight of load cell |
ca. 7 kg (eye bolts optional) |
Box Set
1 x Force Gauge PCE-DFG N 100K
1 x Load cell (depending on model)
1 x USB cable
1 x Charger
1 x PC software
1 x User manual
1 x Calibration certificate
(Eye bolts optional, see accessories)
Force Gauge PCE-DFG NF Series 