Single-disc metallographic grinding and polishing machine MP-160E
เครื่องนี้ใช้ระบบควบคุมไมโครโปรเซสเซอร์ซึ่งสามารถรับความเร็วโดยตรงระหว่าง 50-600 รอบต่อนาที เพื่อให้เครื่องมีการใช้งานที่หลากหลายยิ่งขึ้น เป็นอุปกรณ์ที่ขาดไม่ได้สำหรับผู้ใช้ในการทำตัวอย่างโลหะ

Important notices and safety information
The MP-160E metallographic sample grinding and polishing machine is a single-disc desktop machine, which is suitable for rough grinding, fine grinding and polishing operations on metallographic samples.
This machine adopts a microprocessor control system, which can directly obtain the speed between 50-600 rpm, so that the machine has a wider range of applications. It is an indispensable equipment for users to make metallographic samples。
The machine is equipped with a cooling device, which can cool the sample during grinding and polishing to prevent the metallographic structure from being damaged due to overheating of the sample. The machine is easy to use, safe and reliable, and is an ideal sample preparation equipment for factories, scientific research units and laboratories of colleges and universities.
The grinding and polishing machine consists of a base, a motor, a grinding and polishing disc and a control panel. The machine adopts glass fiber reinforced plastic shell, which makes the machine more beautiful in appearance and has good corrosion resistance.
Main Specifications
Grinding and polishing disc diameter: Φ203mm(Can be customizedΦ230mm、Φ250mm)
Grinding and polishing disc speed: 50-600 rpm (stepless speed change) 150 rpm and 300 rpm (two-stage constant speed)
Sandpaper diameter: Φ200mm(Can be customizedΦ230mm、Φ250mm)
Operating voltage: 220V 50Hz
Input power: 550W
Dimensions: 500*910*475mm
Net weight: 35KG

Operation keyboard and display
A: Display screen: After the device is powered on, the current speed will be displayed after startup.
B: Start key: Press the start key, the device will run.
C: Stop button: It has the dual functions of running stop and fault reset. Press the stop button to stop the operation. When the system has faults such as overvoltage, overload, overheating, overcurrent, undervoltage, short circuit, etc., the equipment will automatically stop. Press the stop button to reset the system automatically.
D: Steering key: Pressing the steering key can freely switch the running direction of the machine, which can be switched during operation.
E: V key and 2V key: It is a secondary speed control key. Press the V key, the grinding and polishing disc rotates at 150 rpm, and press the 2V key, the grinding and polishing disc rotates at 300 rev/min. The V key and the 2V key can be preset before starting, or can be set during operation.
F: △ key and ▽ key: are stepless speed regulation keys. During the running process of the machine, press the △ key to increase the speed, and press the ▽ key to decrease the speed.
Packing List
Name |
Specification |
Unit |
Quantity |
Product Manual |
|
Pcs |
1 |
Product certification |
|
Pcs |
1 |
Packing List |
|
Pcs |
1 |
Polishing cloth |
|
Pcs |
2 |
Metallographic sandpaper |
400# 600# |
Pcs |
2 |
Grinding and polishing disc |
|
Pcs |
1 |
Aluminum buckle |
|
Pcs |
1 |
Drain pipe |
|
Pcs |
1 |
Water inlet pipe |
|
Pcs |
1 |