Holiday Detector S4001 PTE (Paint Test Equipment)

S4001. Holiday Detector 0.5–6Kv. Includes High Voltage Handle

เป็นเครื่องทดสอบผิวเคลือบโดยไม่ทำลายชิ้นงาน ด้วยคุณสมบัติของเครื่อง Holiday Tester สามารถตรวจสอบชิ้นงานผิวเคลือบด้วย รังสีแกมม่า เอ็กซ์เรย์แม่เหล็ก คลื่นเสียง เพื่อตรวจสอบรอยหรือจุดบกพร่องต่างๆ ในโครงสร้างของวัสดุ ด้วยหลักการทาสีบนชิ้นงาน

ดาวน์โหลด

Product Description
The Holiday Detector is a DC Holiday Tester for detecting pinholes and flaws in coatings on conductive substrates.
Available in the following Holiday Detector models: S4001 0.5–6kV for coatings up to 1100μm, S4002 1–20kV for coatings up to 3700μm and S4003 1–30kV for coatings up to 8000μm.
Where coatings have to provide an effective safeguard against corrosion, it is essential that any pinholes or flaws that will eventually lead to corrosion are detected at the earliest possible stage.
Supplied in an industrial Carrying Case with High Voltage Handle, Band Brush Probe, Earth Cable (10m) and Carrying Bag.  Calibration Certificate with traceability to UKAS is an optional extra.
Compliant to the following Standards: ISO 29601, ISO 2746, ASTM D5162, ASTM G62, NACE SP0274, NACE SP0188 and NACE SP0490.

Technical Specification
S4001 Holiday Detector 0.5–6kV for use with coatings up to 1100μm. Resolution 0.01kV.

S4002 Holiday Detector 1–20kV for use with coatings up to 3700μm. Resolution 0.1kV.

S4003 Holiday Detector 1–30kV for use with coatings up to 8000μm. Resolution 0.1kV.

Voltage accuracy ±1%.

Specification

Accuracy: ±1%.
Resolution S4001: 0.01kV.
Resolution S4002 & S4003: 0.1kV.
Voltage Type: DC.

Compliance
ISO 29601, ISO 2746, ASTM D5162, ASTM G62,
NACE SP0274, NA

Instructions
Information
If the coating has been applied recently, it should
be cured in accordance with the manufacturer’s
instructions before testing.  In the absence of
manufacturer’s instructions the coating should be
cured for at least 10 days.
The surface of the coating should be free of oil, dirt
and other contaminants before testing.

Ordering

Broad Brushes
 
Brass-filled Brushes for the testing of coatings on
large flat areas using the Holiday Detector.
 
All Broad Brushes come complete with the
connector assembly. 

 Ordering

Circular Brushes
 
Brass-filled Circular Brushes for the testing of
coatings on the internal diameter of pipes using the
Holiday Detector.
 
All Brushes come complete with the connector
assembly.

Ordering

Rolling Springs
Phosphor Bronze Rolling Springs for the testing of
coatings on the external diameter of pipes using
the Holiday Detector.
All Rolling Springs require the SA490 Rolling
Spring Connector.  One Rolling Spring Connector
can be used on multiple Rolling Springs.

Extension Rods

Insulated Extension Rods for extending the reach of the Brushes and Rolling Springs using the Holiday Detector. Extension Rods can be connected together to make longer lengths when using Circular Brushes down long pipes.

SA002 Extension Rod 500mm (20″)
SA003 Extension Rod 1000mm (40″)