เครื่องหล่อชิ้นงานละเอียด

Autometic Metallographic Specimen Mounting Press METAMON-6

AUTOMATIC METALLOGRAPHIC SPECIMEN MOUNTING PRESS

MODEl : METAMON-6

Model METAMON-6 is a new touch screen type automatic metallographic specimen mounting press, all working procedures can be done automatically. After the parameters such as heating temperature, heat preserving time and applied force, etc. Are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary  for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.

Feature

- Microcomputer control, automatic Pre-heating, heating, applying pressure, cooling, etc.

- Pressure, temperature, heating and cooling time can be set via touch screen

- Water-forces cooling, quickly get the sample

- Large size touch screen LCD, graphical HMI for friendly and easy operation

- Two demos can be done simultaneously

- Four kinds diameter moulds ( Ø25mm, Ø30mm, Ø40mm, Ø50mm) can be chosen, easily change

Technical specifitions

- Pressure : 0~2MPa (product pressure : 0~72MPa)

- Mounting temperature : 50-300 ˚C

- Shortest mounting time : < 15 minutes

- Mould diameter (can be randomly selected 2 types) : Ø25mm, Ø30mm, Ø40mm, Ø50mm

- Heating power : 1000W

- Voltage : 220V

- Dimension : 630x520x520mm

- Net weight : 120Kg