Torque Screwdrivers DID

The DID is a torque measuring manual screwdriver designed for lab and production use. The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1SD software.

The DID has an accuracy of ± 0.5% F.S., ±1 LSD and has programmable setpoints that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Optional ratcheting clutch allows for convenient tightening or loosening. Use the 800 internal memory for data recall or USB download for SPC.

The DID substantially reduces scrap and rework costs by eliminating over and under-tightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.

Features
- Includes 3-Point Certificate NIST Traceable Calibration Certificate, ISO-17025 Cert Optional
- Peak, Real Time and Peak Down measuring mode (selectable)
- Statistics: number of data, Max, Min, Avg
- Programmable screw tightening counter
- DID-4 uses standard 1/4" bits, DID-05 uses 4mm ROUND or Half ROUND bits.
- Selectable units ozf-in, lbf-in, kgf-cm, N-cm and N-m
- Runs on internal NiCad batteries (8 hour use) Auto shut-off after 10 min. of non-use
- Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
- USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
- 800 data memory for recall or for SPC download
- Programmable Auto Zero function resets unit to zero for easy operation
- 2 Phillips tips, AC charger and carrying case included
- 2-Year Warranty
- DID-05 features a built-in 1 way clutch

Force Ranges

Model	Capacity	Resolution
DID-05	69.50 in-oz 4.500 in-lb 5.000 kg-cm 50.00 N-cm	0.01 in-oz 0.001 in-lb 0.001 Kg-cm 0.01 N-cm
DID-4A	560.0 in-oz 35.00 in-lb 40.00 kg-cm 400.0 N-cm 4.000 N-m	0.1 in-oz 0.01 in-lb 0.01 Kg-cm 0.1 N-cm 0.001 N-m

Dimensions

Specifications

Accuracy	+/- 0.5% F.S., +/- 1 LSD
Display	4 digit LCD
Operation	CW, CCW and fixed position (DID-4 Only)
Measuring Modes
PP	Peak Mode displays PEAK torque value that will not change until a higher value is measured
PD	Peak Down Mode Captures first peak down value above the PDLO
Real Time	Displays transient torque values
C	Real-time Output 180 data per second
GO/NO GO testing	Programmable High and Low setpoints with both audible beep and Green/Red LED indicator
Statistics	Number of data, maximum, minimum and average
Data Transfer	ASCII, 19200 bps, USB miniB cable
Data Memory	800 data
Batch Counter	1-99 (CW only)
Power Supply	Ni-Cad rechargeable batteries 1.2V×4cells 600mAh
Auto Power Save	Automatic switch off after 10 minutes of non-use
Charging Time	From empty - less than 5hours
Working Time	12 hours continuous use
Accessories	AC/DC Adapter/Charger, 100~230VAC, 2 Phillips bits, NIST certificate
Warranty	1 Year