Torque tester
DIS-IP series (-IP05/5/50/200/500)
Suitable for managing various manual torque wrench & torque drivers
Standard model for static torque measurement
Bigger characters size and enhance user convenience.
Enable to be installed in a small space due to a separate type.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.
Show "Measurement mode" "Measurement unit" Indication of "maximum, minimum, average"
Switchable measurement unit
Enable to save 5 sets of settings such as upper limit and lower limit
800 items of memory data
Real-time output About every 1/180 seconds
Data acquisition software can be downloaded for free
The lineup of the DIS-IP series is DIS-IP05, DIS-IP5, DIS-IP50, DIS-IP200, DIS-IP500
About accessories
A Calibration Certificate, Inspection Sheet and Traceability Chart are appended to all the products for free.
You can use those documents as a part of a customer's quality system right after purcahsing.
Yes-No Decision Conditions etc. Can Save Five Channels
A channel is only changed even if bolting conditions change.
It is not necessary to reset up a maximum value and a minimum value one by one like former.
Specification
DIS-IP05
DIS-IP5
DIS-IP50
DIS-IP200
DIS-IP500
Measuring Range (At time of Track)
2.0 ~ 500 mN･m
0.20 ~ 50 kgf・cm
0.20 ~ 45 lbf・in
0.020 ~ 5 N･m
0.20 ~ 50 kgf・cm
0.20 ~ 45 lbf・in
0.20 ~ 50 N･m
2.0 ~ 500 kgf・cm
2.0 ~ 450 lbf・in
2.0 ~ 200 N･m
20 ~ 2000 kgf・cm
20 ~ 1740 lbf・in
2.0 ~ 500 N･m
20 ~ 5000 kgf・cm
20 ~ 4500 lbf・in
Accuracy
±0.5% (499 or less digit ±3 digit)
Display
The 4 figures digital display of LCD
The measurement direction
CW-CCW (right and left)
Measuring
mode
P-P Peak
Peak load value hold
T-R Track
Indication of real time torque value.
P-D Peak down
Holding Load Value at the moment to change from upward to downward
C Real-time output
Load torque value is outputted every about 1/180 second
Decision
function
Setting of torque value
A maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED
The Maximum, the minimum, and the average value
The maximum, the minimum value, and average value of the saved data
Automatic Clearance
Automatically clear the displayed value after certain time (0.5 – 3.0 sec, selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero
Easy Zero-Adjustment with pressing CLEAR button
Data spec
Data transfer
ASCII format (Baud rate: 19200)
Data memory
800 data
Power supply
Ni-Cd chargeable battery 1.2V x 5 cells 700mAh
Auto power save
10 minutes no use, automatically switch off.
Charging time
About 3 hours
Continuous working time
12 hours
Meter outside type dimension
100(W) x 105(D) x 40(H) (It does not contain by the projection thing)
Weight
Meter part 520g
Code length
Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories
(one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure
เครื่องทดสอบแรงบิด DI-4B-25 (JAPAN) 