เครื่องวัดความแข็ง Portable Hardness Tester Model T-D2

Leeb Hardness Tester NOVOTEST T-D2 is designed for rapid non-destructive hardness testing of various objects.

Leeb Hardness Tester NOVOTEST T-D2 uses dynamic method of hardness testing – Leeb method, standardized according to ASTM A596.

Leeb probe is used for measuring the hardness of non-ferrous metals, cast iron, materials with coarse-grained structure, solid products, etc.

Leeb method for the hardness testing

The Leeb hardness measuring method complies to ASTM A956.

The Leeb probe (D type) is used for hardness measuring of massive objects (more than 5 kg, and more than 10 mm) and made of steels non-ferrous metals,  cast irons, coarse-grained materials, e.t.c. Also, Leeb method perfectly complements with UCI hardness measuring method when UCI method is not applied.

This method is very fast and easy: place the probe on tested object vertically to the object surface, push the probe to charge the spring, press the button on the top of the probe to make measurement and save the hardness value, shown on the display. For the Leeb measuring method, NOVOTEST-D2 automatically calculates hardness for a wide range of materials, like steel, stainless steel, aluminum or cast iron.

The combined hardness tester is the most universal, needs no recalibration, and is fully operational “out of the box”.

Features:

- Hardness testing of standard steels and alloyed steels

- Hardness testing of cast iron and nonferrous metals

- Testing of tensile strength of carbonized steels products of pearlite class for tension

- Implementation of the rebound method (Leeb)

- Allows user to test the products with weight more than 5 kg and thickness more than 10mm without any additional actions

Specification

 Materials

- Leeb probe – pre-calibrated for steel, alloy steel, stainless steel, aluminum or cast iron.

- Additional custom scales and materials for calibration.

Hardness scale

- Leeb probe – HRC, HB, HV

- Additional custom scales for calibration.

DEVICE MAY BE USED IN EXTREME CONDITIONS OF OPERATION

Shock-resistant, rugged housing with a silicone protective bumper cover allows the hardness tester to be made shockproof. The indicator of the device is clearly visible in the sun, when used in the dark – it has a display backlight with adjustable backlight. The hardness tester can be used both in the cold (up to -25 ‎°C), and in conditions of high temperatures. Thus, user can measure hardness in the most severe conditions without worrying that the device can let him down.

DIFFERENT PROBE’S TYPES

If necessary, the device can be equipped with a probes of various types to solve various tasks of hardness measuring.

Software