Wall Thickness เครื่องวัดความหนาขวด Model FH-7200-4

Wall thickness gauge หรือเครื่องวัดความหนาขวด เป็นเครื่องมือที่ใช้สำหรับวัดความหนาของวัสดุ ประเภทแก้ว พลาสติก รวมไปถึงวัสดุที่เป็นอโลหะที่แม่เหล็กไม่สามารถดูดติดได้ โดยตัวเครื่องวัดความหนาขวดชนิดนี้ใช้หลักการ Magnatic ในการดูดเม็ดบอลโลหะ กลิ้งไปตามวัสดที่ต้องการวัดความหนา และยังสามารถเข้าตามซอก มุม หรือพื้นที่ๆ เข้ายากๆ ได้อีกด้วย

Model

Measuring Range

Measuring Tolerance

FH7200-4

0…1.3 mm with 1.0 mm steel ball

0…2.0 mm with 1.5 mm steel ball

0…3.5 mm with 2.5 mm steel ball

0…6.0 mm with 4 mm steel ball

0…5.0 mm with 1.5 mm magnetic ball

0…9.0 mm with 3.0 mm magnetic ball

0…1.3 mm: ± (3 µm + 1% of reading)

0…2.0 mm: ± (3 µm + 1% of reading)

0…3.5 mm: ± (5 µm + 1% of reading)

0…6.0 mm: ± (10 µm + 1% of reading)

0…5.0 mm: ± (20 µm + 2% of reading)

0…9.0 mm: ± (40 µm + 2% of reading)

FH7200-10

0…4.0 mm with 2.5 mm steel ball

0…7.0 mm with 4.0 mm steel ball

0…10.0 mm with 6.0 mm steel ball

0…13.0 mm with 9.0 mm steel ball

0…16.0 mm with 4.0 mm magnetic ball

0…24.0 mm with 6.0 mm magnetic ball

0…4.0 mm: ± (5 µm + 1% of reading)

0…7.0 mm: ± (10 µm + 1% of reading)

0…10.0 mm: ± (20 µm + 1% of reading)

0…13.0 mm: ± (20 µm + 1% of reading)

0…16.0 mm: ± (40 µm + 2% of reading)

0…24.0 mm: ± (60 µm + 2% of reading)

MiniTest FH Series Precision Magnetic Thickness Gauge

Made in GermanyThe FH-Serie models: FH-7200 and FH-7400 are portable thickness measuring devices that are capable to measure precisely materials with a thickness up to 24 mm. Their small size and portability makes them ideal to be used in production areas and quality laboratories. With the FH Serie models accurate thickness measurements can be done on all types of non-ferrous products, regardless of their size, shape, and material.

The FH-7200 and FH-7400 are ideal for applications where accurate measurement of sharp corners, small radiuses and/or complex shapes are required.

Software

The FH-Serie models: FH-7200 and FH-7400 are used for non-destructive wall thickness measurement of:

Non-magnetic materials like synthetic materials, glass, ceramic, non-ferrous metals...

All kinds of hollow items like bottles, aluminium cans, glass and plastic containers with complex geometries...

Thermo-moulded parts like cups, cans, bowls, bottles

Die-cast and moulded plastic parts, fibre compound materials, non-ferrous metals etc., for e.g. in the automotive field (gear casing, body and interior components), in avionics (turbine components, combustion chambers, high-pressure pipes), in the medical field.

The two models available in this series

FH-7200 offers measurement capabilities including real-time thickness measurement, display of minimum & maximum readings, an offset mode, and automatic storage of up to 100,000 values.

FH-7400 this model has the same capabilities as the MiniTest 7200 FH but with extra features: statistical graphing, real time trend, data base with up to 200 batches and increased automatic storage of up to 240.000 values. e.g. 1200 per batch.

There are five probes available

FH4 Standard Probe (Measuring range 0 - 6mm / calibration curves for ball sizes 1.5mm, 2.5mm, 4mm)

FH4-1MM Probe (Measuring range 0 - 6mm / same as standard FH4 probe with additional 1mm ball calibration curve for very small concave surfaces)

FH4-M Probe (Measuring range 0 - 9mm / same as standard FH4 but also suitable for magnetic balls to extend measuring range to 9mm)

FH10 Standard Probe (Measuring range 0 - 13mm / calibration curves for balls sizes 2.5mm, 4mm, 6mm, 9mm)

FH10-M Standard Probe (Measuring range 0 - 24mm / same as standard FH10 but also suitable for magnetic balls to extend measuring range to 24mm)

The basic units MiniTest FH7200 and MiniTest FH7400 are supplied in foam fitted case and it contains the following items:

- MiniTest FH7200 or MiniTest FH7400 Device

- Rubber protection case with integrated table stand

- Operating instructions (English/German/French/Spanish/Portuguese/Italian)

- 4x AA Batteries, type LR06 - MSoft 7 Professional Edition

- Magnetic Screwdriver

- MSoft Pro 7 Software

-Manufacturer certificate according to DIN 55350 M

Depending on the selection of your probe the following scope of the delivery applies:

FH4 Probe

- Magnetic Probe Protection sleeve and end cap