Ultrasonic Thickness Gauge เครื่องวัดความหนาโลหะ Model UT-1M-ST (NOVOTEST)

Advantages
- Unique additional protection of metal housing;
- Saved data can be transmit to PC;
- Material selection and automatic setting of ultrasound velocity;
- Large graphic display of high contrast and backlight;
- Display of measured thickness in mm and inches;
- Convenient menu in the device;
- Wide choice of UT probes with preset settings in the device;
- Modes of statistical processing of measurements;
- Ability to restore factory calibrations;
- Ability to adjust all parameters of the acoustic path;
- Ability of further adjusting the user gain directly from the measurement mode;
- Wide range of testing;
-Mode of audible and visual alarm when break the preset ranges.

Specification

Measuring thicknesses range , mm: Probe 10MHz – P112-10-6 / 2 Probe 5MHz – P112-5-10 / 2 Probe 2,5MHz – P112-2,5-12 / 2	0.5 … 500 or more range 0.8-30 mm range 1-75 mm range 2-300 mm
Probe dimensions, mm: Probe 10MHz – P112-10-6 / 2 Probe 5MHz – P112-5-10 / 2 Probe 2,5MHz – P112-2,5-12 / 2	D12×15 mm D17×20 mm D20×21 mm
Diameter of probe contact area, mm: Probe 10MHz – P112-10-6 / 2 Probe 5MHz – P112-5-10 / 2 Probe 2,5MHz – P112-2,5-12 / 2	9 mm 14 mm 16 mm
Size of plate: Probe 10MHz – P112-10-6 / 2 Probe 5MHz – P112-5-10 / 2 Probe 2,5MHz – P112-2,5-12 / 2	6 mm 10 mm 12 mm
Setting range of the ultrasonic velocity, m / s	1000-9999
Discrete readings on the digital indicator, mm	0.1
Response time, with no more than	1
Basic measurement accuracy, mm	± (0,01 T+/- 0.05)
Echo-Echo mode (through coating measuring), max thickness of coating, mm	1
Standards	ASTM E797
Storage of measurement results	256
Overall dimensions, mm	120x60x25
Operating temperature range, ° C	-5 to +40
Power supply	2 AA batteries
Time of continuous work hours, not less, h	10
Weight of electronic unit with battery, no more, kg	0.2

Available Options
- Couplant
- UT-probes
- Calibration blocks

Standard Package
- Electronic unit Ultrasonic Thickness Gauge UT-1M-ST
- Transducer (probe) – 1 pc
- AA batteries – 2 pcs
- Charger
- Cables
- Operating manual
- Case

Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST
Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST is a special version of the thickness gauge in a metal enclosure, which is designed for extreme operating conditions, when there is a possibility of the device dropping or other damage of the unit during operation. The durable aluminum bodie’s profile withstands high static and dynamic compression loads, which allows the operator to use the device “carelessly”.

Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST is designed to measure the thickness of products with low attenuation of ultrasonic vibrations, with one-way access to them during their manufacture and operation.

WIDE RANGE OF THICKNESS OF TESTING PRODUCTS

Same as other ultrasonic thickness gauges TM “NOVOTEST”, Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST allows user to measure the thickness of products in a wide range with a minimum set of transducers, this is achieved thanks to the advanced settings of the device (amplification of two stages, V-correction, etc.)

UNIVERSAL TRANSDUCERS

Any dual-element probes can be connected and configured to the device by cables with standard connectors. What makes Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST universal to use, and does not limit users in choosing a probes for operation.

DISPLAY THE PRODUCT PROFILE WHEN SCAN

The device has a scanning mode of the product in the mode of a B-scan, which allows user to visualize thinning and thickening of the wall like a graph on the display of the device. This allows the user to see the product profile, which simplifies the operator’s work. Additionally, there is an alarm function for exceeding the maximum and minimum thickness limits that are pre-set by the operator.

THICKNESS SAMPLE FOR ADJUSTING THE DELAY OF THE TRANSDUCER

Like other ultrasonic thickness gauges TM “NOVOTEST”, the Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST has a thickness sample mounted on the device’s body, which allows the user to quickly set “0” (calculate the delay in the probe) when changing the transducers or the operating conditions of the device.

The device has a memory where the referencebook of the propagation velocities of the most common materials is stored, also the device allows user to save the settings of the transducers and measurement results, which can be stored both in the device and transferred to a PC using special software that is supplied with the standard Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST set.