Coating Thickness Gauge PCE-CT 100N
สอบถามสินค้าได้ที่ 02-9744354-6 สายด่วน 088-7777277
Line : @itokin2000.com
Email : salesitokin@gmail.com
Coating Thickness Gauge (PCE)
เครื่องทดสอบความหนาสี ผิวเคลือบ จากประเทศอังกฤษ (United Kingdom) U.K.
เครื่องมือวัดความหนาสี เป็นเครื่องมือวัดค่าความหนาของผิวเคลือบ เช่น งานชุบ, งานพ่น วัดได้ทั้ง Ferrous & Non Ferrous (โลหะ และอโลหะ)
ดาวน์โหลดสเปก
Coating thickness gauge PCE-CT 100N
Surface tester for ferrous and non-ferrous metals / Very compact size / Non-destructive, precise measurements / Data transmission via USB and Wifi / Simple operation / Uncomplicated and reliable
The surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the surface tester are used for the non-destructive testing of materials. The surface tester is used to measure the thickness of magnetically neutral layers on a magnetic or non-magnetic base material.
The surface tester is ideal for reliable layer thickness measurements on site. With the external probe, the layer thickness can be measured quickly and easily, even in hard-to-reach places. The surface tester was developed for non-destructive, fast and precise layer thickness measurements and is easy to use. Measured data can be easily transferred to a PC using a USB data storage device or via WiFi.
The surface tester is used in particular in the finishing industry, electroplating, ship and bridge construction, aircraft construction and the machine and chemical industry.
- Illuminated touch keyboard
- Measurement data storage for up to 500 data
- One-point and multi-point calibration
- Single measurement and continuous measurement
- Data transfer via wifi and USB
- Two different probes for NFe and Fe
 |
 |
| |
|
| |
|
Specification
| Measuring range |
0 ... 1250 µm; 0 ... 49.2 mil |
| Min. coating thickness of base material |
50 µm |
| Smallest measuring surface (diameter) |
10 mm |
| Min. radius of curvature convex |
15 mm |
| Min. radius of curvature concave |
15 mm |
| Accuracy |
± (1% + 1 µm); ± (1% + 0.04 mil) |
| Resolution |
0.1 µm (<99.9 µm); 0.004 mil (<3.9 mil) |
| |
1 µm (> 100 µm); 0.04 mil (> 3.9 mil) |
| Calibration |
Single point, multiple point |
| Data storage |
500 data |
| Measuring modes |
Single measurements, continuous measurement |
| Interfaces |
Wifi , USB |
| Operating conditions |
0 ... 50°C / 32 ... 122°F, 20 ... 90% RH non-condensing |
| Dimensions |
170 x 85 x 35 mm / 6.7 x 3.3 x 1.4 in |
| Weight |
Approx. 335 g / < 1 lb (with battery) |
Box Set
1 x Coating thickness gauge PCE-CT 100N
1 x NFe probe
1 x Fe probe
1 x USB data carrier
1 x Reference film set
1 x Calibration plate (ferrous)
1 x Calibration plate (non-ferrous)
2 x 1.5V AA batteries
1 x Instruction manual
Coating Thickness Gauge PCE-USC 30 