Coating Thickness Measuring Device PCE-CT 25FN
Coating Thickness Gauge (PCE)
เครื่องทดสอบความหนาสี ผิวเคลือบ จากประเทศอังกฤษ (United Kingdom) U.K.
เครื่องมือวัดความหนาสี เป็นเครื่องมือวัดค่าความหนาของผิวเคลือบ เช่น งานชุบ, งานพ่น วัดได้ทั้ง Ferrous & Non Ferrous (โลหะ และอโลหะ)
ดาวน์โหลดสเปก
Coating Thickness Coating Thickness Measuring Device with convenient one-hand operation / MIN MAX and MEAN display /
Battery indicator / various units / automatic shutdown /
for ferrous and non-ferrous metals / small and compact design
The Coating Thickness Measuring Device is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other paint thickness gauges, this Coating Thickness Measuring Device does not have to differentiate between ferrous and non-ferrous metal. With the small and compact design of the Coating Thickness Measuring Device, one-hand operation is possible. Despite its small size, the Coating Thickness Measuring Device has a measuring range of 1500 µm and an accuracy of ± (3% + 1 µm).
The measured values displayed can be output in µm, mm and in mils on the Coating Thickness Measuring Device. In addition to measuring the layer thickness, the Coating Thickness Measuring Device can determine the smallest, the largest and also the mean value from a series of different measurements. The Coating Thickness Measuring Device also has an automatic switch-off function.
- small and compact design
- fast measuring frequency
- Calibration set included
- Different units can be selected
- also for continuous measurements
- comfortable one-hand operation
Specification
| Measuring range |
0 ... 1500 µm |
| Measurement accuracy |
± (3% + 1 µm) |
| resolution |
0.1 µm in the measuring range 0 ... 100 µm |
| |
1 µm in the measuring range> 100 µm |
| units |
µm, mm, mils |
| Smallest curvature |
convex 5 mm, concave 25 mm |
| Smallest measuring area |
Ø 20 mm |
| Minimum thickness of the substrate |
Fe: 0.3 mm |
| |
NFe: 0.05 mm |
| Measuring rate |
Max. 2 Hz |
| Power supply |
9 V block battery |
| Operating conditions |
-10 ... 50 ° C, 20 ... 90% RH non-condensing |
| Storage conditions |
-10 ... 60 ° C, 20 ... 90% RH non-condensing |
| Dimensions |
143 x 85 x 39 mm |
| Weight |
approx. 100 g |
| Housing material |
SECTION |
1 x PCE-CT 25FN Coating Thickness Measuring Device
5 x calibration foil reference
1 x Fe zero standard
1 x NFe zero standard
1 x 9 V block battery
1 x instruction manual
Coating Thickness Gauge PCE-USC 30 